Join our mailing list!

Vaping Underground



  Home > Batteries >

  eGo C 2 USB 1000mAh Battery

Alternate Views:

eGo C 2 USB 1000mAh Battery (Upgraded)

The eGo-C 2 upgrade battery is the newest improvement of Joyetech battery, and it comes with "eGo-CTM" logo.  Each Joye eGo-C 2 USB battery has a built-in battery  which allows the user to vape during charging. A fully charged battery  can support a heavy user to vape at least 10 hours.  It's sealed to prevent being spoilt by e-juice.  

The biggest improvement of this battery: it has two modes to switch. One is the constant voltage output mode which is 3.3V (same as the normal eGo-C BATTERY). The other is variable voltage output mode (up to 4.15V)
This battery also have the previous lock/unlock function(5-click protection) in both of the two modes. The protection switch makes it safer and easier to use and this can prevent accidental battery discharge when not in use.

Note: the battery comes charged.
1pc  Joyetech logo eGo-C2 upgrade 1000mAh USB Battery
(with a built in 1000mAh li-ion battery)
1pc  Charger cord

Capacity 1000mAh 
Sealed battery. One
full-charged new battery can support about 10 hours vaping
Battery length 112mm
Battery diameter 15mm
USB cable length

Item# Item Name CEV Price Qty
EGOCusbbat1000-0001 eGo-C 2 USB 1000mAh Battery-Black
EGOCusbbat1000-0003 eGo-C 2 USB 1000mAh Battery-Pink
EGOCusbbat1000-0002 eGo-C 2 USB 1000mAh Battery-Stainless
Check the items you wish to purchase, then click

Other Information:
How to switch the mode:
From constant voltage output mode to new battery voltage output:

*When the mode is 3.3v constant output mode,  lock the battery by 5 clicks first(blue LED blinks 3 times)
*By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks
The battery has switched to variable voltage output mode
*Then click 5 times to turn on the battery, you can use it in battery voltage output
In new battery voltage output mode, the LED is orange and battery doesn't have power display function
*When charging, orange LED will blink 5 times in this new mode
From new battery voltage output to constant voltage output mode:

*In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times)
*By pressing button for 5 seconds(not 5 clicks), LED will change to blue with 3 blinks
And the mode has switched to 3.3V constant voltage output mode
*Then click the button 5 times to turn on the battery and use it in 3.3V constant voltage
* In 3.3V constant voltage, the battery features has no difference from present eGo-C battery
* When charging, blue LED blinks 5 times in this new mode

Average Customer Review: 4 of 5 | Total Reviews: 1 Write a review.

  5 of 5 people found the following review helpful:
not to bad October 5, 2012
Reviewer: Constantine DragonRyder from Earth  
I wish i got this in the stainless steel, but the black rubber like feel is very nice. I have tried the vivi nova tank, kangers, and the version two stardust (with replaceable heads) and the revision three (long wicks, spiked cone) on it as well and they preform ok. Also have tried a few bridegless atomizers on it, again with not much issue.

The one thing i am trying to wrap my head around is that when you put it in unregulated mode it seems to loose it's ability to run the carts properly.....I am guessing this is due to the fact you loose the PMW (pulse width modulation)...though it would be more then interesting to see the ego boast on this pass through...

Oh one last thing: when you have it in the regulated (blue) mode, it will tell you how much battery power you have:
White light: !00% power
Sky blue: 50% power
blue: 10% power

Was this review helpful to you?

Browse for more products in the same category as this item:

Batteries > eGo Battery